How to produce photoelectric composite cable production?

How to produce photoelectric composite cable production?

• The production process of photoelectric composite cable typically involves the following steps:

1. Conductor preparation: This involves selecting and preparing the conductive material (usually copper or aluminum) that will be used to transmit the electrical signal. The conductor is typically drawn through a series of dies to reduce its diameter and increase its strength.

2. Optical fiber preparation: This involves selecting and preparing the optical fiber that will be used to transmit the light signal. The fiber is typically coated with a protective layer and then wound onto a spool.

3. Core assembly: The conductor and optical fiber are then assembled together to form the core of the cable. This is typically done by placing the optical fiber in the center of the conductor and then wrapping it with a layer of insulating material.

4. Sheathing: Once the core has been assembled, it is then covered with a protective sheath. This is typically made of PVC or other plastics and helps to protect the core from damage during installation and use.

5. Jacketing: Finally, the cable is jacketed to provide additional protection against environmental factors such as moisture, heat, and abrasion. The jacket is typically made of a tougher material than the sheath and may be reinforced with additional layers for added protection.

• Overall, producing photoelectric composite cable requires a combination of specialized equipment and skilled technicians who can ensure that the cable meets the necessary quality and performance standards.